Roof Repair in Taylor - Free Roof Inspection, Written Price

Fast, Reliable Roof Repair Across Taylor

Roof repair in Taylor typically runs $275 to $1,400 depending on what failed, with most shingle and flashing repairs landing between $350 and $800. We schedule Taylor jobs every week, and our crews know the difference between a 1920s bungalow near Main Street and a 1998 tract home on the west side. If you have water coming through, missing shingles, or a leak that’s been “waiting until spring” since August, call (254) 540-7345. We answer the phone, we give you a written price before any work starts, and we show up when we said we would.

Call (254) 540-7345

Why Tilehurst Roofing Austin Is Taylor’s Preferred Roof Repair Company

Greg Holloway leads our Roof Repair team, and the way we operate in Taylor is simple: a written price is in your hands before a single nail is driven, every repair carries a written guarantee, and a live person answers the phone 24/7. That last part matters in this town. Roof leaks don’t wait for business hours, and neither do we.

Taylor homeowners ask us for something specific. They’ve dealt with contractors who quote one number and change it at the door. They’ve had repairs fail inside a month with no recourse. Tilehurst Roofing operates under the Kingswell Guarantee, which has been in place since 2000: if a repair fails inside the guarantee period, we return and correct it at no charge. That’s not a premium add-on. That’s the floor.

Our crews work Taylor neighborhoods regularly, from the Doak-Moody Historic District to the newer subdivisions west of Carlos G. Parker Boulevard. We understand how steep gables, narrow side yards, and historic district rules change the job before it even starts. Dispatch and scheduling are coordinated from the brand’s Austin office, but the crews you’ll see on your roof are serving Taylor locally.

Commercial Roof Repair in Taylor

Commercial Roof Repair in Taylor covers a different set of buildings than what you’ll find in a typical Austin suburb: older storefronts along Main and Second Streets with built-up or metal roofs, church and school buildings with steep architectural profiles, and newer light-industrial structures near the US 79 corridor. Leaks here are rarely a simple shingle swap. We’re usually tracing water through membrane seams, parapet flashing, or roof penetrations, then writing a repair scope that gets the building watertight without shutting down your business for a week.

Pricing for commercial repairs in Taylor depends on the system and the extent of the water intrusion. A straightforward membrane patch on a flat retail roof typically runs $600 to $1,400. Parapet flashing repair with custom metal fabrication lands in the $900 to $2,200 range. Every commercial job includes the same written price before work starts and the same written guarantee that our residential customers get. You’ll know the number before we move a ladder.

Membrane Patching and Seam Repairs on Taylor Commercial Roofs

Most flat and low-slope commercial roofs in Taylor use TPO, EPDM, or older built-up asphalt systems. The seams are where they fail, especially after a Central Texas hail season opens pinholes that let water wander far from the actual puncture point. Our crews trace the water path, not just the visible stain, because ceiling stains in a 1940s Taylor storefront are often 15 feet from the real breach.

Parapet and HVAC Curb Flashing on Older Commercial Buildings

Downtown Taylor has commercial buildings where the parapet flashing has been patched by three different contractors over 40 years. That patchwork is often the leak source. We remove the layered repairs, fabricate new flashing to fit the actual profile, and install it so the next rain doesn’t find the same weak spot.

Roof Leak Repair in Taylor

Roof Leak Repair in Taylor is the most common call we take, and it’s rarely as simple as “find the hole and nail a shingle over it.” Taylor’s older homes have roof systems that were never designed for modern wind-driven rain or the long, hot summers that bake sealant into something resembling chalk. A leak near a chimney on an 1890s Victorian usually traces to rotted decking under the flashing, not the flashing itself.

Leak repair pricing in Taylor starts around $275 for a simple vent boot or small flashing patch and runs up to $1,200 or more when decking replacement and custom metal work are involved. The written price you get before we start is the price you pay. If the repair fails inside the guarantee period, we come back and fix it for free under the 365-Day Done Right Promise.

Chimney, Valley, and Wall-Step Flashing Leaks

Flashing failures account for a good share of Taylor roof leaks, especially on older houses where chimney flashing was installed with materials that have since corroded or separated. We remove the old flashing, inspect the decking underneath, and install new metal that matches the roof’s profile. On historic homes, that often means hand-forming the flashing to match a turkey wing gable rather than bending an off-the-shelf piece that doesn’t seat correctly.

Leaks That Been Patched Before

We see a lot of Taylor roofs that have been tarred, caulked, and spray-sealed by previous attempts. Layered repairs eventually fail because they don’t address the water path. Our approach is to strip the failed patch, identify where water is actually getting in, and repair the source. That costs more up front than adding another layer of tar, but it’s the only repair we’re willing to guarantee in writing.

Trusted Brands We Service in Taylor

We work with materials from seven major manufacturers, which means the product matches your Taylor home instead of whatever happens to be loaded on our truck. For asphalt shingle repairs we commonly install Owens Corning, IKO, and Atlas products; for metal and specialty profiles we work with Tamko materials when the application calls for it. The full lineup includes GAF, CertainTeed, and Boral as well. If your Taylor roof needs a match for an existing architectural shingle color, we’ll source the exact product so the repair doesn’t look like a band-aid. We stock common local replacement parts and can get specialty material to Taylor quickly when the historic district calls for something uncommon.

Common Roof Repair Problems We See in Taylor Homes

• Historic district gable and flashing failures. Homes with turkey wing gable ends and original flashing were built before modern sealants existed. The metal work often cracks or separates at the profile transitions, and off-the-shelf replacements don’t fit the geometry.
• Hail and wind impact on aging shingles. Taylor sits in a hail corridor, and roofs built in the 1980s and 1990s weren’t rated for what Central Texas now throws at them. Missing granules and impact bruising are common, especially after spring storms.
• Rotted decking under old vent boots and flashings. On pre-1940s homes, a leaking pipe boot or chimney flashing often rots the tongue-and-groove decking underneath. The visible shingle damage is small; the structural repair underneath is the actual job.
• Improper previous repairs on steep pitches. A 12:12 roof on a downtown bungalow is a different animal than a 4:12 on a west-side subdivision home. We regularly correct repairs where the wrong starter strip, wrong nail pattern, or wrong drip edge was used, leading to recurring leaks.

Pricing for Roof Repair in Taylor, TX

We Also Serve Cities Near Taylor

Roof Repair in Taylor keeps our crews close, but we regularly run jobs in Pflugerville, Round Rock, Manor, and Leander. If you’re just across the county line or a few exits away, the same written pricing, written guarantee, and 24/7 live phone answer applies.

FAQs About Roof Repair in Taylor