Boral Roofing Company Nationwide

Boral Roofing Company in Austin: What to Know First

Tilehurst Roofing Austin provides independent Boral roof repair, replacement, and inspection across Austin, with most service calls completed within three to five business days of your first phone call. We are not a Boral-authorized dealer, and we do not pretend to be one. What we are is an independent Boral service provider that gives you a written price before any work starts, so you know exactly what the job costs before a single fastener comes out of the bag.

Call (254) 540-7345

This page is for Austin homeowners who own a Boral roof and need straight answers about what fails, what it costs to fix, and who actually shows up to do the work. If you are looking at a leak, cracked tile, or a section that just does not look right, call (254) 540-7345 and a live person answers, day or night.

How Boral Products Fail – and How We Fix Them

Boral makes a durable roof, but no roof is indestructible, especially in Austin’s heat-and-hail cycle. Here are the failures we see most often on Boral roofs in this city, and what we do about each one.

• Boral Concrete Tile (S-Tile and Flat Profile) – cracked tile from impact or foot traffic. Hail leaves spiderweb cracks that do not leak immediately but let water into the tile body, which then freezes in rare Austin cold snaps and splits the tile wide open. We replace the damaged tile with a matching profile and color blend so the repair is invisible from the ground. Austin hail storms in the spring are the usual culprit, and we see it most in neighborhoods like Circle C and Avery Ranch.
• Boral Villa Tile – underlayment failure before tile failure. The tile itself often outlives the underlayment beneath it. When the synthetic underlayment degrades from years of Texas sun exposure at eaves and valleys, water reaches the decking while the tile looks perfectly fine from the curb. We lift the affected tile, replace the failed underlayment section, and re-bed the tile. This is the most common Boral repair we perform in Austin, and it is one most homeowners never see coming because the tile hides it.
• Boral Steel Stone-Coated Shingles – granule loss at ridge and hip caps. On Boral’s stone-coated steel lines, the ridge cap takes the brunt of wind-driven rain and sun. We see granule wash-off at the cap edges, which exposes the steel beneath and leads to rust streaks. The fix is replacing the cap units and reseating them with the correct fasteners, not patching with sealant, which fails within a season.
• Valley flashing separation on Boral tile roofs. Austin’s rapid temperature swings expand and contract metal flashing faster than the tile around it. Over time, valley flashing pulls away from the tile, and water runs under instead of down. We re-secure or replace the valley metal and re-point the surrounding tile. This one is specific to tile roofs, and it is the first thing we inspect on any Boral repair call in Austin.
• Improper previous repairs using non-Boral tile. We regularly find Boral roofs in Austin patched with whatever tile a previous contractor had on the truck. The profile does not match, the color is wrong, and the water channel does not interlock. We source actual Boral tile or a profile-matched equivalent, remove the mismatched pieces, and restore the roof’s original drainage pattern.

Our Boral Roofing Company Process

Every Boral job we take in Austin follows the same path. Here is what happens from the moment you call us.

1. 1
   The call. You call (254) 540-7345, a live person answers, and we schedule a visit in a specific window that we keep.
2. 2
   The roof read. Greg Holloway or one of our background-checked technicians walks the roof, takes photos, and identifies exactly what failed, why it failed, and whether it is a repair or replacement situation. We check the tile, the underlayment beneath it, the flashing, the decking, and the drainage path.
3. 3
   The written price. Before any work starts, you get a written line-item price in your hands. Not a range, not a verbal estimate. A number. If we find something additional once work begins, we stop, show you, and re-price before proceeding. The Kingswell Way is this: say the price before the work, and do not change it at the door.
4. 4
   The parts decision. On warranty-sensitive Boral repairs, we use genuine Boral tile and components where available. Where an aftermarket underlayment or flashing outperforms OEM at a better price, we tell you that and let you choose. You are never locked into a single house brand, and we carry relationships with seven manufacturers, including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral.
5. 5
   The repair. The crew arrives on time, works clean, and leaves the property cleaner than they found it. Drip edge, ridge cap, decking, flashing, underlayment, each component we touch gets inspected and corrected to spec.
6. 6
   The written guarantee. Before the crew leaves, you receive a written guarantee covering the repair. If that repair fails inside the guarantee period, we return and correct it at no charge under the 365-Day Done Right Promise.

What Boral Roofing Company Costs in Austin

Here are the numbers we quote most often for Boral work in Austin. These are honest ranges, not teaser prices.

• Single cracked Boral concrete tile replacement: $75 to $150 per tile, depending on access and color match.
• Localized underlayment repair under Boral tile: $450 to $900 for a typical valley or eave section, including re-bedding the tile.
• Valley flashing replacement on a Boral tile roof: $600 to $1,400 depending on valley length and whether decking repair is needed.
• Boral stone-coated steel ridge cap replacement: $400 to $800 per 10 linear feet.
• Full Boral tile roof replacement in Austin: $18,000 to $38,000 for an average 2,000 to 2,500 square foot home, depending on tile profile, underlayment type, decking condition, and slope.

What moves the price: roof pitch, two-story access, existing decking condition, whether the tile is still in production or must be sourced from salvage, and how much of the underlayment has degraded. Call (254) 540-7345 for a free estimate. We give you the number before work starts, and that number does not change once we are on the roof.

Why Austin Homeowners Call Tilehurst Roofing Austin for Boral Work

We are part of the Kingswell family of roofing companies, founded in 2000, and we operate under the Kingswell Guarantee at every local location. That means a written price before any work starts, a written guarantee on every repair delivered before the crew leaves, and a free second visit if the repair fails inside the guarantee period. We do not ask you to trust us on faith. We put it in writing.

Our technicians are background-checked and uniformed, so you know exactly who is on your roof. A live person answers our phone 24 hours a day, seven days a week, including evenings and weekends. And because we install and service seven major roofing brands, including GAF, Owens Corning, and CertainTeed, we will never push you into a Boral product if a different material fits your home and budget better. As Greg Holloway says, “Tell me the roof, I’ll tell you the price – no surprises once we’re up there.”

FAQs