Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Repair in Austin: What to Know First
Boral roof repair in Austin typically runs $320 to $1,400 depending on whether we’re replacing a few ridge caps, sealing a valley leak, or rebuilding flashing around a chimney. Most Boral repairs are completed in one visit, and you’ll get a written price before any work starts. As an independent Boral service provider, we’re not affiliated with the manufacturer, but our techs work on Boral tile and Boral steel roofing almost every week across Austin. If you own a Boral roof and you’ve spotted a leak, cracked tile, or rust bleeding from a fastener, call us at (254) 540-7345 and we’ll give you a straight number when we’re standing on the roof.
How Boral Products Fail – and How We Fix Them
Boral builds good materials. But every roof system has weak points, and Austin’s heat, hail, and sudden downpours find them faster than most climates. Here’s what we see on Boral jobs in this city:
- Cracked Boral concrete tile from foot traffic or hail. Austin gets hailstorms that crack tile in ways a homeowner won’t always notice from the ground. A hairline crack lets water wick through, then freeze-thaw cycles around the holidays widen it. We replace individual tiles, matching the profile and color as closely as the roof’s age allows. A 15-year-old tile won’t perfectly match a new one, and we’ll tell you that before we order anything.
- Boral Steel roof fastener back-out. Boral’s stone-coated steel lines (like Boral Steel) rely on thousands of fasteners. Austin’s extreme temperature swings cause metal to expand and contract repeatedly, and over a decade, some fasteners work loose. You’ll see a small rust stain or hear a faint rattle near the ridge. We re-secure with replacement fasteners and re-seal the penetration so it’s watertight again.
- Valley flashing failure on tile and steel alike. The valley is the V where two roof planes meet, and it channels a lot of water during Austin’s spring storms. On Boral tile roofs, valleys often fail when the metal flashing underneath corrodes or gets punctured by shifted tiles. On Boral Steel, the valley pans can separate at seams. We rebuild valleys with fresh flashing and re-lay the surrounding tile or steel to drain clean.
- Vent boot breakdown on Boral Steel. The rubber boots around plumbing vents crack under Austin’s UV exposure, usually around year eight to twelve. Water follows the pipe down into the ceiling and you’ll see a stain on the drywall before you ever see a roof problem. We replace the boot, re-flash around the pipe, and re-secure the surrounding Boral Steel panel.
- Ridge cap mortar wear on older Boral tile roofs. Boral tile is heavy and durable, but the mortar bedding under ridge and hip caps erodes with age. Once the mortar crumbles, cap tiles loosen and the roof loses its first line of defense at the very top. We re-bed caps with fresh mortar and seal the joint so wind-driven rain stays outside where it belongs.
Greg Holloway reads a Boral roof the same way he reads a weather report: quickly, accurately, and without drama. The difference between a Boral tile roof that’s just dirty and one that’s fracturing isn’t obvious from the driveway. It’s obvious from standing on it.
Styles & brands we work with
Our Boral Roof Repair Process
- 1
You call, a person answers. We ask what you’re seeing: a stain, a drip, a tile in the yard. Then we schedule a visit in a window that works for you.
- 2
We inspect the roof, not just the symptom. A leak at the ceiling might start at a vent boot 20 feet away. We trace water before we touch anything.
- 3
We make a parts decision. For Boral tile, we use OEM tile where it’s available, and quality matched aftermarket tile where it isn’t, always disclosing which. For Boral Steel, OEM panels preserve manufacturer warranty language better than generic metal, and we’ll explain the trade-off in plain English before you spend a dollar.
- 4
You get a written price before any work starts. We don’t “rough estimate” and then revise upward at the door. The number on the paper is the number you pay.
- 5
We do the repair, then test it. Water-testing a repair is messy but it’s the only honest way to know it works. We do it on every leak repair.
- 6
You get a written guarantee before we leave. Not mailed later. Handed to you when the crew finishes, with the 365-Day Done Right Promise behind it.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Repair Costs in Austin
Here’s what Austin homeowners can expect to pay for common Boral repair scenarios, based on what we’ve quoted on real jobs in neighborhoods like Travis Heights, Tarrytown, and Circle C:
- Single tile replacement: $320 – $480 (includes matching, sealing, and re-securing surrounding tile)
- Valley leak repair on Boral tile or steel: $600 – $1,100 (new flashing, re-laid tile or steel)
- Vent boot replacement on Boral Steel: $380 – $520 (new boot, re-flash, re-seal)
- Fastener re-torque and re-seal on Boral Steel: $450 – $750 for a typical Austin two-story
- Ridge cap re-bed on Boral tile: $800 – $1,400 depending on linear feet
What moves the price? Steep-pitch roofs cost more for safety equipment and time. Two-story homes cost more than ranch-style. And any time the decking underneath is rotted, that’s additional square footage you need to know about. We show you photos before recommending decking replacement. Call (254) 540-7345 to schedule a free estimate and get a written line-item quote.
Why Austin Homeowners Call Tilehurst Roofing Austin for Boral Work
We’re a Kingswell family roofing company, founded in 2000, and we’ve built this business around one idea: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That’s The Kingswell Way, and it’s not a marketing tagline. It’s the operating manual.
Our techs are background-checked and uniformed, so you know exactly who’s on your roof. Every repair carries a written guarantee delivered before the crew leaves, and if that repair fails inside the guarantee period, we return at no charge under the 365-Day Done Right Promise. We also work across six other major brands, GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko, so if your Boral roof reaches the point where replacement makes more sense than repair, you’re not locked into one manufacturer’s catalog. You’ll have genuine options, priced honestly.
FAQs
In most cases, no, repairing a Boral roof does not automatically void the warranty, as long as the repair follows Boral’s installation guidelines for the specific product. What can void coverage is using non-compatible flashing, wrong fasteners, or improper techniques during the repair. We match Boral’s spec requirements on every repair, and we’ll document what we did in writing so you have a record if you ever need to file a warranty claim. Call (254) 540-7345 if you want us to look at what you’ve got before you commit to anything.
Most Boral repairs are completed in a single visit once we’ve inspected and quoted the job, typically within a few days of your call depending on parts availability. Even when we need to order specific Boral tile profiles or steel panels, we can usually schedule within the week in Austin. Leak repairs get prioritized because water inside the house is doing damage every day. Call (254) 540-7345 and we’ll give you a straight answer on timing for your specific roof.
Yes, OEM Boral tile and Boral Steel panels are still available through our supplier network, though specific color lots and older profiles can take longer to source. When exact-match OEM parts aren’t available, we quote a quality aftermarket match and disclose the difference in writing before ordering. Austin’s housing stock includes Boral roofs installed over a 25-year span, so we’re used to hunting down specific profiles. Call (254) 540-7345 and we’ll tell you in plain language what’s available for your roof.
Repair makes sense when the damage is localized: a handful of cracked tiles, one failing valley, or a few backed-out fasteners. Replacement becomes the honest recommendation when the underlayment has widespread exposure, the decking is compromised in multiple places, or you’re chasing leaks all over the roof and throwing money at symptoms. We’ll tell you when repair is throwing good money after bad, and we’ll show you the photos that justify the call. For a straight assessment, call (254) 540-7345, estimates are free.
No, concrete tile is brittle and cracking it is easy if you don’t know how to distribute weight correctly, which is why we use roof jacks and walk boards on every Boral tile job. Walking directly on tile can create the very cracks that lead to leaks. That said, our techs do walk Boral tile roofs safely every week, using the right equipment and decades of combined experience. If you’re asking because you want to inspect your own roof, we’d say save the risk and the cracked tile, and have a professional do it from the start.
Have a Boral roof that needs attention? Call (254) 540-7345 for a free estimate. We’ll give you a written price before any work starts, and a written guarantee before we leave the driveway.
Written by Greg Holloway, Owner, Tilehurst Roofing Austin at Tilehurst Roofing Austin, serving Austin and nearby areas.