Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterValley Repair in Austin, TX
Valley repair in Austin typically costs between $450 and $1,400, depending on how far the water damage has traveled and whether the underlying decking needs replacement. Most valley repairs are completed in a single day, and we give you a written price before any work starts, so you’ll know the exact cost before a single shingle comes off your roof. If you’re seeing water stains near a roof valley or noticing granule loss where two roof planes meet, call us at (254) 540-7345 for a free estimate.
A roof valley is the V-shaped channel where two roof slopes meet, and it carries more water than any other part of your roof. When that valley fails, leaks don’t stay in one place. They travel along rafters, under the decking, and into ceilings or walls far from the original gap. As part of our Roof Repair work, we’ve found valley failures in nearly every Austin neighborhood we’ve worked in, from Allandale to Circle C, and the cause is almost always the same: either the valley metal has rusted through, or the valley was installed with shortcuts that didn’t account for Austin’s heavy spring downpours.
You can find our full overview of Roof Repair in Austin here, including how our written guarantees work. Valley repair is one of the most common repair calls we get at Tilehurst Roofing Austin, and it’s also one where a small delay turns a $500 fix into a $3,000 ceiling and insulation replacement. That’s why we answer the phone with a live person, 24 hours a day, and schedule valley repairs as quickly as possible.
Key Takeaways
- Typical valley repair in Austin runs $450 to $1,400, with most jobs finished same day.
- We write the price before any work starts, so there are no door-knock surprises.
- Every valley repair includes a written guarantee, and a free return visit if the repair fails inside the guarantee period.
- A live person answers our call 24/7. No voicemail. Nobody waits until Monday.
- Valley leaks travel. The stain on your ceiling is often 6 to 10 feet from the actual roof penetration.
When You Need Valley Repair
Valleys are the roof’s rain gutters before gutters exist. They channel every drop of water from two roof planes into a single stream. In Austin, where spring storms can drop two inches of rain in an afternoon, a valley that’s even slightly compromised moves enough water to damage ceilings, insulation, and drywall in a single storm cycle. The signs are often subtle at first, which is why we recommend checking valleys after every major hail or wind event.
- Water stains on the ceiling near the inside corner of a room. This is the classic valley leak signature. By the time the stain shows through, the decking underneath has been wet at least once, and the leak has likely been active for weeks. In neighborhoods like Hyde Park and Crestview, where homes predate modern ice-and-water shield underlayment, we see this pattern more often.
- Granule loss or bare spots where two roof slopes meet. Austin’s heat breaks down asphalt shingles from above, and the constant water flow through valleys wears them from below. When you see the fiberglass mat showing through along a valley line, water is already working its way under the shingle edges.
- Rust or pinholes in exposed valley metal. Most Austin homes use galvanized steel or aluminum valley metal. Both eventually corrode, especially under oak and pecan trees where damp leaf litter sits against the metal for months. In Tarrytown and Deep Eddy, we regularly replace valley metal that’s rusted through from years of wet leaves.
- Water in the attic, especially near the eaves. Valley leaks often follow the rafter line downhill, then drop onto attic insulation near the outer walls. If you find wet or crusty insulation in the attic after a rain, the valley above is the first place we look.
- Buckling or lifting shingles along the valley line. Wind-driven rain in West Austin and the Hill Country gets under loose shingles along valley edges. If the valley shingles aren’t laying flat, water gets underneath and walks horizontally across the decking.
- Your roof is 15 or more years old and you’ve never had the valleys inspected. Valley repairs on older Austin roofs are often preventative. If your shingles start to look weathered in the valleys before the rest of the roof, that’s the roof telling you the valleys are doing the heavy lifting and wearing out faster.
If any of these match what you’re seeing, don’t wait. The next Austin rain is always a few days away, and valley leaks compound quickly. Greg Holloway, our owner at Tilehurst Roofing Austin, has walked hundreds of Austin valley inspections, and he’s happy to talk through what you’re seeing before any visit or quote.
Our Valley Repair Process
We follow five steps on every valley repair, and you’ll know what’s happening at each one. The Kingswell Way, which Tilehurst Roofing Austin operates under, means saying the price before the work and putting the guarantee in writing before the crew leaves. Here’s what that looks like on your valley repair.
- We inspect the valley in person, for free. One of our technicians climbs the roof and examines the valley metal, the surrounding shingles, the underlayment where visible, and the decking condition. We’ll also get into the attic to trace any water damage. You don’t pay for the estimate, and we don’t rush it.
- We show you the damage and give you a written price. Before any roofing work begins, you’ll have the full repair cost in writing. If we find decking damage or rotted wood under the valley, we’ll show you photos and tell you exactly what it adds to the price. No “we discovered this after we started” phone calls. The Kingswell Way is a written price before work starts, every time.
- We install or repair the valley with proper underlayment. Depending on your roof’s condition, we’ll either replace a full section of valley metal, weave new shingles through a closed valley, or install the right underlayment underneath. In Austin, we recommend ice-and-water shield under metal valleys because it stops water from traveling sideways across the decking, which is exactly what kills ceilings in Mueller and Windsor Park.
- We seal, check, and photograph the finished repair. Before we leave, we run water over the valley, check the attic from below, and photograph the finished work. You’ll see exactly what was done and why.
- We hand you the written guarantee before the crew leaves. Every valley repair carries a written guarantee. If that repair fails inside the guarantee period, we return at no charge. That is the 365-Day Done Right Promise, and it is written down, not promised over the phone and forgotten.
The entire process for a standard valley repair usually takes one day. Replacement valleys with extensive decking repair can take two. We’ll tell you the timeline in advance, and we arrive in the window we give you.
Valley Repair Pricing in Austin
Here’s what valley repair typically costs in Austin as of 2026. These are real price ranges based on the work we do across the city, not national averages from some database. Your exact price depends on roof height, valley length, the condition of the surrounding shingles, and whether the decking under the valley is still sound.
Typical Valley Repair Costs
| Repair Type | Typical Cost in Austin | When You Need It |
|---|---|---|
| Reseal and repaint valley metal | $450 to $700 | Minor rust, hairline cracks, or loose sections with no decking damage |
| Replace valley metal section | $700 to $1,200 | Rusted through metal, leaks around nail holes, or improperly lapped metal |
| Replace valley and underlayment | $900 to $1,400 | Missing or failed underlayment, water tracking sideways under the shingles |
| Full valley rebuild, including decking | $1,400 to $2,600 | Rotted decking, long-term leaks, or valleys that have failed repeatedly |
The biggest driver of valley repair cost in Austin is decking damage. If water has been getting under the valley for more than a season, the plywood or OSB underneath is often soft, stained, or delaminated, much like what we see during a Vent Boot Repair inspection. Replacing that decking adds $150 to $400 per sheet, depending on the thickness and the decking type. Homes with original 1970s and 1980s decking in neighborhoods like Brentwood and Northwest Hills tend to need this more often than newer builds in Leander or Round Rock, but it happens everywhere.
What doesn’t affect your price: roof color, shingle brand (we install valley systems across brands like Tamko, Boral, GAF, and CertainTeed), or whether your home is one story or two. The labor involved in a valley repair is mostly about the valley’s length and the surrounding roof condition.
Every estimate we give for valley repair in Austin is free, and the written price is yours to keep whether or not you hire us. Call (254) 540-7345 for a same-day or next-day inspection, and we’ll walk you through the pricing in plain language.
FAQs – Valley Repair
How much does valley repair cost in Austin?
In Austin, valley repair typically costs between $450 and $1,400, with full rebuilds involving decking replacement running up to about $2,600. The exact price depends on whether the valley metal alone is failing or the underlayment and decking need replacing too. Every estimate is free, and you get the written price before any work starts. Call (254) 540-7345 for an exact quote.
Is it cheaper to repair a roof valley or replace the whole roof?
Repairing a valley is almost always cheaper, especially if the rest of the roof is in good shape. A quality valley repair in Austin runs $700 to $1,200 on average, while a full roof replacement is typically $10,000 or more. But if your roof is past 20 years old and multiple valleys are failing, you’re likely spending money on repairs that a full replacement would address more economically. Greg Holloway can walk you through the numbers for your specific roof.
Can you fix a roof valley the same day in Austin?
Yes, in most cases. Standard valley repair with no decking damage is a one-day job, and we keep common valley materials in stock from manufacturers like GAF and CertainTeed. In Austin’s spring storm season, we prioritize active leaks, and we can often get a crew to you within 24 to 48 hours. Call (254) 540-7345 and a live person will get you scheduled.
What causes roof valleys to leak?
Valleys leak for three main reasons in Austin: rusted or corroded valley metal, failed underlayment that lets water travel sideways under the shingles, or poor installation where the valley wasn’t woven or step-Flashing Repair done correctly. Austin’s heavy thunderstorms, combined with long dry spells that bake and crack sealants, make valley failures more common here than in drier climates. A free inspection will identify which of these you’re dealing with.
Does your valley repair come with a written guarantee?
Yes. Every valley repair we complete at Tilehurst Roofing Austin includes a written guarantee delivered before the crew leaves, not mailed later. If the repair fails inside the guarantee period, we return and fix it at no charge. That’s our 365-Day Done Right Promise, and it’s in writing, every time.
Why Austin Homeowners Choose Tilehurst Roofing for Valley Repair
Valley repair isn’t glamorous work, but it’s the kind of repair that separates roofers who care about getting it right from roofers who are in and out in a morning. A bad valley repair fails in the next heavy rain. A good one, properly sealed and underlaid, lasts for a decade or more.
We use the right materials for Austin’s climate. Our valley repairs are available with underlayment and shingles from Tamko, Boral, GAF, and CertainTeed, and our technicians are background-checked and uniformed, so you know exactly who’s on your roof. If you’ve been burned before by a roofer who no-showed or changed the price at the door, the Kingswell Way is designed around the specific failure you experienced. We answer the phone. We show up in the window we gave you. We put the price and the guarantee in writing before anything happens, and the crew leaves your yard cleaner than they found it.
This is what we do. If your roof valley is leaking, or you’re not sure if it is, call us at (254) 540-7345 and we’ll send someone out for a free inspection. A live person will answer, day or night, and we’ll give you a straight answer about what needs fixing and what it will cost. No pressure, no games. You can also start with our home page for a broader look at how we work, or see our Roof Repair in Austin page for the full range of repair services we offer.
Written by Greg Holloway, Owner at Tilehurst Roofing Austin, serving Austin.